Trending

N-Lauroyl-L-lysine Laruoyl Lysine CAS 52315-75-0

Powder, white or off-white. Insoluble in oil, water and many organic solvents. Solvable in strong acids and alkalis. N-Lauroyl L lysine Laruoyl Lysine (CAS 52315-75-0): White or off-white powder insoluble in most organic solvents and water. Solvab…

More>>

Lauryl trimethyl ammonium chloride CAS 112-00-5

It is soluble both in water and ethanol and compatible with cationic as well as nonionic surfactants. Lauryl trimethylammonium Chloride CAS 112-00-5 It is easily soluble in ethanol and water, and it has good compatibility both with cationic as wel…

More>>

OEP-95 2-Ethylhexanol Ethoxylate Phosphate CAS 68439-39-4

It is easily soluble in water and has a high alkali resistant (200g of NaOH/L), as well as resistance to oxidants, reducing agents and hard water. OEP 95 2-Ethylhexanol Ethoxylate Phosphate OEP 95 2-Ethylhexanol Ethoxylate Phosphate possesses the…

More>>

Castor-oil Sulfated Sodium Salt Turkey Red Oil Sodium Salt CAS 8002-33-3

Castor oil and sulfuric acit is neutralized to make an anionic surfactant. This soap is more easily dispersed than normal soap in water. It has better acid resistance, hard-water resistance, and emulsification. Castor-oil sodium sulfate salt: Cast…

More>>

AEC-9Na Sodium alcohol ether carboxylate, 28%

The new anionic multifunctional surfactant, sodium alcohol ether, carboxylate has excellent detergency as well as emulsification and dispersibility. It also disperses calcium soap.Solid Content: 28% About Sodium alcohol carboxylate The sodium alc…

More>>

Tricetylmonium chioride CAS 52467-63-7

The hair will be moderately plump and soft after using the shampoo. Tricetylmonium Chloride CAS No. 52467-63-7 After use, it can be used in shampoos, hair care products and other products that give hair moderate plumpness and softness. The suggest…

More>>

MAEP-K Potassiam Monoalkyl Phosphate CAS 58318-92-6

The liquid is transparent and colorless at room temperatures. It produces a rich, foamy foam with excellent foaming. The skin is not irritated by it, and the product does not feel tight after washing. About MAEP K Potassiam Monoalkyl Phoshate The…

More>>

Dodecyl-bis(2-hydroxyethyl)-methylazanium-chloride

The antistatic agent used in the woven fabric aids in mineral flotation. About Dodecyl-bis(2-hydroxyethyl)-methylazanium,chloride: Dodecyl-bis(2-hydroxyethyl)-methylazanium,chloride has the characteristics of rich and fine foam, low degreasing po…

More>>

 Whats so unique about Inconel 625 powder

What is Inconel 625" powder? Inconel 625 With high resistance and strength at higher temperatures. The Inconel-625 has a high level of resistance to corrosion and oxidation. Inconel 625 has many advantages, especially in the nuclear power industry…

More>>

Applications-of-fumed-silica-powder-fumed-silica-V274

Applications of fumed silica powderFumed silica powders are created by the pyrolysis procedure of flame, quartz sand or silicon tetrachloride. They have a big specific area and also a reduced mass density.Fumed phase silica powder is utilized in a wi…

More>>

HR-S2 Sodium Lauryl Phosphate

The paste has good skin texture and phosphatolipid-like properties.Solid content: 58-62% About HRS2 Sodium Laury Phosphate HR-S2 sodium laurryl phosphate has rich and fine foam, low degreasing, low irritation to skin, hair and skin, and excellent…

More>>

MAP-K Potassiam Monoalkyl Phosphate CAS 39322-78-6

MAP-K, a transparent liquid with a 40% colorless to light yellow content at room temperatures, is a colorless or light yellow transparent liquid.Solid content up to 40% About MAPK Potassiam Monalkyl phosphate: MAPK Potassiam Monoalkyl Phosphate f…

More>>

Related news

Application of seal on oil film bearing of rolling mill and the bearing services market trend

Application of seal on oil film bearingof rolling mill Oil film bearing is also called liquidfriction bearing. In the process of rolling the mill, liquid lubrication isused to form a complete pressure oil film between the cone sleeve and bushing.The…

More>>

What is γ-Al2O3?

Various crystal forms of alumina (α, β, γ, δ, θ, etc.) have been found, among which γ-Al2O3 is also called active alumina.…

More>>

Difference between 316 and 316L Stainless Steel

From April the French government will reduce fuel taxes slightly to ease the burden on consumers. Warned of possible energy shortages in France by the end of the year and called on the French to conserve electricity and gas from now on, saying that i…

More>>

Copper Forgings: Definition, Characteristics and Key Issues in the Production Process

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity 3D Printing 304 Stainless Steel Powder

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%