What is Hafnium Carbide and Tantalum Carbide? Tantalum carbide is a brown powdered metal cubic of the sodium chloride system. The tantalum carbide used today is a sintered cemented carbide grain growth inhibitor. This has an important effect in suppressing grain development and has a densities of 14.3g/cm3. It is insoluble and insoluble in water. It dissolves in a mixture of hydrofluoric, nitric and hydrofluoric acids. It has a strong antioxidant capacity, and can be easily melted or decomposed with potassium pyrosulfate. It has a high conductivity, and a resistance 30 O at room temperatures, which indicates superconducting qualities.

Hafnium carburide is normally synthesized by combining cerium (HfO2) and carbon with an inert, reducing or inert atmosphere. The reaction temperature ranges from 1900 to 2300 deg C, which can lead to a solid-solution of many compounds such as ZrC and TaC. ).

Tantalum Hafnium Carbide properties:
Researchers have developed two new heat resistant materials, tantalum carbide (TaC), as well as tantalum carbonate (HaC), both of which can resist temperatures up to nearly 4,000 degC.

A research team from Imperial College London found that tantalum carbide's melting point has also set a new material record. These two materials are capable of withstanding temperatures up to 4000 deg C. They could be used for more extreme and extreme environments.

These two ceramics have a high heat resistance. Due to their ability to resist extreme conditions, these materials could find applications in high-speed rockets and nuclear reactors with ultra-heated fuel cladding. It is not yet known if the two ceramics TaC and HfC can withstand extreme conditions. This is because there are currently no laboratory technologies that test the melting temperature of these ceramics.

The researchers have developed a new technology for extreme heating that tests the heat resistance of TaC, HfC and mixtures. Using this method, the researchers were able to determine the melting point for both the TaC element and HfC mixture. This study has been published in Scientific Reports.

They found that although the melting point (3905 deg C) of the mixture of ceramics (Ta0.8H2O20C), was in line with previous studies, the melting points for the two compounds themselves are higher. TaC reaches 3768 deg C while HfC reaches 3958 deg C.

The researchers stated that the appearance of these two materials would pave way for the creation of the next-generation hypersonic planes. The future spacecraft could be faster than before.

Dr. Omar Cedillos Barraza completed his Ph.D. at Imperial College London in Physics. Dr. Sadiez Barazza works as an assistant professor at the University of Texas at El Paso.

Saidi Barazza, a Dr. from the University of California at Berkeley, said that friction between an aircraft flying supersonic (more than Mach 5) and the surrounding air can cause a high temperature. TaC and HfC were not used up to now. In the development and production of hypersonic cars. Our new discoveries show that the two materials are far more heat-resistant than previously believed. In fact, their heat resistance exceeds any other compounds currently known to man. The fact that these materials are heat-resistant means they can be applied to new spacecraft. In the atmosphere, spacecrafts can fly at normal speeds and then supersonic speed in space. These two materials will make spacecraft able to withstand extreme heat generated in the shuttle atmosphere.

TaC or HfC could be used for the nose cap of the spacecraft, and the edge of any external instrument that is most likely to rub against the outside of the vehicle during flight.

At this time, spacecraft faster than 5 Mach cannot be used for manned flight. Saidi Barazza said, however that this dream could very well be realized in future.

Saidi Barazza continued: "Our testing shows that these two materials can be used to build future spacecraft. These two materials can handle such extreme temperatures. If we could fly at Mach 5, then the flight from London to Sydney would only take 50 minutes. This would open up new opportunities for the whole world. "A new continent that brings new business opportunities."

Tantalum hafnium carbide uses:
Tantalum carburide is used as an additive in powder metalworking, cutting tools and fine ceramics. It can also be found in hard wear resistant alloy tools, tools and molds. Tantalum carbide's sintered body is golden yellow and can be used for watch ornaments.

Hafnium carbide is ideal for rocket nozzles. Also, it can be used to make a nose cone on reentry atmospheric rockets. It's used in ceramics, among other industries.
Tech Co., Ltd is a professional Tantalum carburide manufacturer, and has over 12 years' experience in the chemical products research, development, and manufacturing. Contact us to send an inquiry if you are interested in high-quality Tantalum carbide.

Inquiry us